2020. 1. 24. 12:07ㆍ카테고리 없음
When set to 50 Hz, a low-pass filter attenuates, turns down, all the frequencies above that setting. At 50 Hz, the crossover has turned it down by 3 dB. One octave higher, at 100 Hz, the signal will have been turned down a total of 15 dB. That's low volume, but not entirely off - so it's normal to hear a 100 Hz tone with the low-pass set at 50 Hz. Martin ZS6BZM – had an accident, while setting up the output power on the clubs Kenwood TRC-70 radio, the old Beacon Radio, Martin didn’t realize the Mosfet transistor, on his new Beacon Kit wouldn’t like the 100 watts RF floating around the shack. Well the mosfet popped like an open flower and so the new beacon is no more. DC to Daylight coverage, HF, 6m, 2m, and 70cm, all mode. I talk on a Kenwood 850 buckled up to a heil mic, and I talk am,. I know of no Ham radio that does not use anything other than Low Level audio in the A-M mode. Guys, My ICOM-735 is setting in the closet waiting for the day the FCC cuts.
How can I make this app play louder. In my car, connected via Bluetooth it is simply not loud enough.
At highway speed with my windows down I cannot even hear it. Bluetooth volume is turned all the way up on my Samsung GS7 Edge.
I have Normalize Volume turned off. I've tried several Bluetooth Volume Increase apps and none have worked. I don't know what else to try here.
Low Setting Kenwood Trc-70 Manual
I know it's not the stereo in my car either as it runs 1,500 watts and is plenty loud enough. In fact, everything and every app I use works fine except this one. Am I doing something wrong?